NAV

Copyright © Zhengzhou shenghe grinding technology co., LTD.

ICP备190123456      Powered by www.300.cn

NEWS CENTER

导航

What is emery mainly used for
What is emery mainly used for

What is emery mainly used for

Release time:
2018-08-04
Abstract:
Emery is a silicate mineral. It has a long history of production and use of abrasive materials made by hydraulic separation, mechanical processing, screening and grading.
The casting industry in China has been developing in recent years
The casting industry in China has been developing in recent years

The casting industry in China has been developing in recent years

Release time:
2019-07-19
Abstract:
Is China foundry production country, the domestic casting serious overproduction, but our country's casting refers to the low end of the casting in our country serious overcapacity excess capacity, China's high-end castings produced in is difficult to meet the needs of the market, therefore, demand the low-end castings production capacity of casting industry in China into
How long after coating can be put into use
How long after coating can be put into use

How long after coating can be put into use

Release time:
2019-07-19
Abstract:
1. When the environment is higher than 25 ° c, the curing speed will be accelerated. The coating time after mixing A and B adhesive should be appropriately shortened. And the dosage of each mixing should not be too much, about 1-1.5kg. Generally, it can be completely cured at this temperature for 24 hours and put into use.
Wear-resistant coating manufacturer 7051 magnetic separators dedicated to the use of wear-resistant coating
Wear-resistant coating manufacturer 7051 magnetic separators dedicated to the use of wear-resistant coating

Wear-resistant coating manufacturer 7051 magnetic separators dedicated to the use of wear-resistant coating

Release time:
2019-07-19
Abstract:
The performance characteristics of 1, bicomponent, black or blue paste. Can be cured at room temperature, heating curing can get better comprehensive performance.
The application of wear-resistant coatings for large particles and small particles
The application of wear-resistant coatings for large particles and small particles

The application of wear-resistant coatings for large particles and small particles

Release time:
2019-07-19
Abstract:
Wear-resistant coating thickness is related to the spraying process, the process is different, there are differences in the thickness of small particles wear-resistant particle adhesive and large particles wear-resistant particle adhesive: wear-resistant particle adhesive is in accordance with the size of the diameter of nano-ceramic particles as the distinction, can be divided into small particles wear-resistant particle adhesive