Copyright © Zhengzhou shenghe grinding technology co., LTD.

ICP备190123456      Powered by




How long after coating can be put into use

Page view:

  1. When the environment is higher than 25 ° c, the curing speed will be accelerated. The coating time after mixing A and B adhesive should be appropriately shortened. And the dosage of each mixing should not be too much, about 1-1.5kg. Generally, it can be completely cured at this temperature for 24 hours and put into use.

  2, when the ambient temperature is less than 15 degrees, by the impact of low temperature wear-resistant cement fixed time will be lengthened; Appropriate heating measures shall be taken, which may be heated by means of water-insulation heating or by burning black lamps. Do not put into use when wear-resistant cement has not been completely cured, so as not to affect the performance of the equipment and cause unnecessary losses.